station-meteo/code/main.py

"""Station météo connectée au service Adafruit IO
"""


import time
import machine
import network
import bme280_i2c
from mqtt import MQTTClient
import config

# connect to WLAN
wlan = network.WLAN(network.STA_IF)
wlan.active(True)
nets = wlan.scan()
for net in nets:
    net_ssid = net[0].decode()
    if net_ssid == config.WIFI_SSID:
        print('Network found!')
        wlan.connect(net_ssid, config.WIFI_PSK)
        while not wlan.isconnected():
            machine.idle()  # save power while waiting
        print('WLAN connection succeeded!')
        break
if not wlan.isconnected():
    print("WLAN not found/not connected")

# Create a micropython I2C object with the appropriate device pins
i2c = machine.I2C(scl=machine.Pin(5), sda=machine.Pin(4))

# Create a sensor object to represent the BME280
# Note that this will error if the device can't be reached over I2C.
bme = bme280_i2c.BME280_I2C(address=bme280_i2c.BME280_I2C_ADDR_SEC, i2c=i2c)

# Configure the sensor for the application in question.
bme.set_measurement_settings({
    'filter': bme280_i2c.BME280_FILTER_COEFF_16,
    'standby_time': bme280_i2c.BME280_STANDBY_TIME_500_US,
    'osr_h': bme280_i2c.BME280_OVERSAMPLING_1X,
    'osr_p': bme280_i2c.BME280_OVERSAMPLING_16X,
    'osr_t': bme280_i2c.BME280_OVERSAMPLING_2X})

# Start the sensor automatically sensing
bme.set_power_mode(bme280_i2c.BME280_NORMAL_MODE)


client = MQTTClient(client_id=config.CLIENT_ID,
                    server=config.MQTT_HOST,
                    user=config.MQTT_USERNAME,
                    password=config.MQTT_PASSWD,
                    port=config.MQTT_PORT)
client.connect()

client.publish("test/bme280/humidity/unit", "%", retain=True, qos=0)
time.sleep_ms(100)
client.publish("test/bme280/pressure/unit", "hPa", retain=True, qos=0)
time.sleep_ms(100)
client.publish("test/bme280/temperature/unit", "oC", retain=True, qos=0)
time.sleep_ms(1000)

while 1:
    bme_data = bme.get_measurement()
    print(bme_data)
    client.publish("test/bme280/humidity/value",
                   "{:.0f}".format(bme_data["humidity"]))
    client.publish("test/bme280/pressure/value",
                   "{:.2f}".format(bme_data["pressure"]/100))
    client.publish("test/bme280/temperature/value",
                   "{:.1f}".format(bme_data["temperature"]))
    time.sleep_ms(1000)