27 lines
881 B
ReStructuredText
27 lines
881 B
ReStructuredText
Soldering TrellisM4 with 2 Neotrellis
|
|
=====================================
|
|
|
|
Here is how to do tilled one trellis m4 and 2 neotrellis (seesaw) into a square :
|
|
|
|
1. solder the 2 neotrellis together as described `in the tutorial <https://learn.adafruit.com/adafruit-neotrellis/tiling>`_ (including pad for I2C addresses as needed).
|
|
2. solder the tilled neotrellis to the trellis :
|
|
|
|
- every texts on the silkscreen in the same direction = the LED N°1 of the
|
|
neotrellis and the USB port up
|
|
- among the left pads on the bottom edge of the trellis m4 :
|
|
solder ONLY the center one (GND)
|
|
|
|
.. image:: _static/tilled_trellis_left_pad.jpg
|
|
:scale: 50 %
|
|
|
|
- solder every 5 pads on the right
|
|
|
|
.. image:: _static/tilled_trellis_right_pad.jpg
|
|
:scale: 50 %
|
|
|
|
|
|
Here is a picture of the full tilled board:
|
|
|
|
.. image:: _static/tilled_trellis_full.jpg
|
|
:scale: 50 %
|