Add doc about soldering the boards together

This commit is contained in:
arofarn 2021-06-28 09:16:18 +02:00
parent fcb2a00a69
commit 657db816d4
10 changed files with 47 additions and 0 deletions

View File

@ -41,6 +41,8 @@ This is easily achieved by downloading the `Adafruit library and driver bundle <
Usage Example Usage Example
============= =============
`How to solder boards together <https://circuitpython-trellism4_extended.readthedocs.io/soldering.html>`_
To use Trellis as 2 Neotrellis (seesaw): To use Trellis as 2 Neotrellis (seesaw):
.. code-block:: python3 .. code-block:: python3

BIN
docs/_static/tilled_trellis_full.jpg vendored Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 214 KiB

View File

@ -0,0 +1,3 @@
# SPDX-FileCopyrightText: Copyright (c) 2021 Arofarn
#
# SPDX-License-Identifier: CC-BY-4.0

BIN
docs/_static/tilled_trellis_left_pad.jpg vendored Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 95 KiB

View File

@ -0,0 +1,3 @@
# SPDX-FileCopyrightText: Copyright (c) 2021 Arofarn
#
# SPDX-License-Identifier: CC-BY-4.0

Binary file not shown.

After

Width:  |  Height:  |  Size: 98 KiB

View File

@ -0,0 +1,3 @@
# SPDX-FileCopyrightText: Copyright (c) 2021 Arofarn
#
# SPDX-License-Identifier: CC-BY-4.0

View File

@ -10,6 +10,12 @@ Table of Contents
self self
.. toctree::
:caption: Soldering boards
soldering
.. toctree:: .. toctree::
:caption: Examples :caption: Examples

26
docs/soldering.rst Normal file
View File

@ -0,0 +1,26 @@
Soldering TrellisM4 with 2 Neotrellis
=====================================
Here is how to do tilled one trellis m4 and 2 neotrellis (seesaw) into a square :
1. solder the 2 neotrellis together as described `in the tutorial <https://learn.adafruit.com/adafruit-neotrellis/tiling>`_ (including pad for I2C addresses as needed).
2. solder the tilled neotrellis to the trellis :
- every texts on the silkscreen in the same direction = the LED N°1 of the
neotrellis and the USB port up
- among the left pads on the bottom edge of the trellis m4 :
solder ONLY the center one (GND)
.. image:: _static/tilled_trellis_left_pad.jpg
:scale: 50 %
- solder every 5 pads on the right
.. image:: _static/tilled_trellis_right_pad.jpg
:scale: 50 %
Here is a picture of the full tilled board:
.. image:: _static/tilled_trellis_full.jpg
:scale: 50 %

View File

@ -0,0 +1,4 @@
SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
SPDX-FileCopyrightText: Copyright (c) 2021 Arofarn
SPDX-License-Identifier: MIT