arofarn/Cameteo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add info about pins usage and some tweak to try to debug 2d UART (to raspberry pi)

Browse Source
This commit is contained in:
Pierrick C 2018-08-12 17:09:47 +02:00
parent 57b22c4cc5
commit d9d6d80588
1 changed files with 15 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
circuitpython/code/main.py
View File

@ -22,6 +22,19 @@ Use with:
* Adafruit Ultimate GPS FeatherWing * Adafruit Ultimate GPS FeatherWing
* Bosch BME280 sensor (air temperature, humidity, atmospheric pressure) on I2C * Bosch BME280 sensor (air temperature, humidity, atmospheric pressure) on I2C
Pins used:
* TX/RX : Ultimate GPS FeatherWing (data)
* A5 : Ultimate GPS FeatherWing EN (enabe/disable GPS power)
* I2C SDA/SCL : BME280 sensor
* D5 : RW / RO jumper
* D10, D11 : UART TX & RX to Raspberry pi (115200 baudrate)
* D9 : to EN pin on Raspberry Lipo SHIM
* D13 : onboard LED (as RW/RO indicator)
Back pins diagramm:
D05 D10 D11 D09 NC_
GND GND SCL SDA 3V3
Git repository : Git repository :
https://framagit.org/arofarn/Cameteo https://framagit.org/arofarn/Cameteo
@ -293,7 +306,7 @@ if gps_enable:
# Second UART to communicate with raspberry pi (throught GPIO) # Second UART to communicate with raspberry pi (throught GPIO)
if send_json_data: if send_json_data:
rpi_uart = UART(board.D10, board.D11, rpi_uart = UART(board.D10, board.D11,
baudrate=115200, timeout=2000) baudrate=9600, timeout=2000, parity=None)
# Set onboard Neopixel : used as atmo data output # Set onboard Neopixel : used as atmo data output
# brightness is fixed to 1 to spare some memory. Use neopixel_max_value instead # brightness is fixed to 1 to spare some memory. Use neopixel_max_value instead
@ -331,6 +344,7 @@ while True:
data.show() data.show()
if send_json_data: if send_json_data:
rpi_uart.write(data.json + '\n') rpi_uart.write(data.json + '\n')
print(data.json + '\n')
if backup_data: if backup_data:
data.write_on_flash() data.write_on_flash()
if data_to_neopixel: if data_to_neopixel: